Avtech 35X series Uživatelský manuál stáhnout pdf (Strana 10)

Step4: Select “Apply” to confirm all your

changes. Then, wait till you see

“Done” or “Fail” in “Status”.

Regardless which message you see,

proceed as instructed below:

For Done, you’ll return to the new device

page.

For Fail, select “

” on the top right side.

You’ll later be prompted to select “DDNS”

or “Local IP”. Select “DDNS” and return to

the new device page.

Step5: In the new device page, give a meaningful name for this

connection in “Title”, and click “Save”.

Please continue with configuring port forwarding as

instructed in “APPENDIX 4 CONFIGURE PORT

FORWARDING” at page 18.

Check your connection

Step1: Switch the network mode to 3G mode on iPhone or iPad.

Step2: Start EagleEyes, and select the connection you just added to see if you can access the camera

successfully.

If yes, your network setup is successfully.

If no, go to Step3.

Step3: Switch your network mode to wireless mode on iPhone or iPad.

Step4: Start EagleEyes, and add a new connection with the IP address (e.g. 192.168.2.25) and the port number

(e.g. 88). Then, try this connection and see if you can access the camera successfully.

If yes, go for port forwarding setting as instructed in “APPENDIX 4 CONFIGURE PORT FORWARDING” at page 18.

If no, return to Step1 in “1.2.2 Configuring on iPhone / iPad” and re-configure the network again.

1.5 Router + Modem

You may use your laptop / PC to complete the network configuration of the camera.

Before configuring this camera on your laptop / PC, make sure:

Your Windows operating system is Windows 7, Vista or XP.

(Recommended) Your router supports UPnP, and this function is enabled.

Note: If your wireless router doesn’t support UPnP, you need to additionally access your router for port

forwarding. For details, please refer to “APPENDIX 4 CONFIGURE PORT FORWARDING” at page

18.

You have noted down the IP address of your router.

Note: For details, please refer to the user manual of your router, or check with your installer.

You have downloaded “IPScan.exe” in your laptop / PC.

Note: Please download “IPScan.exe” from www.surveillance-download.com/user/m357a.swf.

Step1: Connect your laptop / PC to the router.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Žádné komentáře

Avtech 35X series Uživatelský manuál Strana 10